- Product Details
Keywords
- HDPE
- LDPE
- PVC
Quick Details
- ProName: Recycled/Virgin HDPE/LDPE/LLDPE Granul...
- Appearance: Transparent /Colour Granular
- Application: General Plastics
- DeliveryTime: within 1 week
- PackAge: Customized
- Port: any port in china
- ProductionCapacity: 10000 Metric Ton/Month
- Purity: customized
- Transportation: by air , by sea , by express
- LimitNum: 1 Kilogram
Superiority
1.Introduction
HDPE has several properties that make it ideal as a packaging and manufacturing product. It’s stronger than standard polyethylene, acts as an effective barrier against moisture and remains solid at room temperature. It resists insects, rot and other chemicals. It is easily recyclable and can be used again and again. Recycled HDPE creates no harmful emissions during its production or during its use by the consumer. Also, HDPE leaks no toxic chemicals into the soil or water.
HDPE is one of the most commonly used plastics in the world. It is typically found in milk jugs, plastic bags and refillable plastic bottles. In addition to plastic lumber and recycled plastic furniture, recycled HDPE is used to manufacture lawn and garden products, buckets, crates, office products and automobile parts.
2.Grade
HDPE pipe grade can be used in the production of pressure pipes, such as pressurized water pipes, fuel gas pipelines and other industrial pipes.
HDPE Injection grade, red, blue, green,
HDPE Blow grade, white, grey, black
HDPE Pipe Grade black pellet
HDPE coating grade
Details
HDPE-High Density Polyethylene
Grade: Film grade,Blow molding grade, injection molding grade,pipe grade .
Film Grade
Item |
Test condition |
Test Method |
Value |
Unit |
Density |
|
ISO 1183 |
0.944-0.955 |
g/cm3 |
MFR |
190°C/2.16kg |
ISO 1133 |
0.03-0.07 |
g/10min |
Tensile strength at yield |
|
ISO 527-2 |
22 |
MPa |
Elongation at break |
|
ISO 527-2 |
>350 |
% |
ESCR |
F50,50°C,100% |
ASTM D-1693A |
1000 |
h |
VICAT |
|
ASTM D-1525 |
126 |
°C |
Blow Molding Grade
Item |
Test Condition |
Test Method |
Value |
Unit |
Density |
|
ISO 1183 |
0.950~0.955 |
g/cm |
MFR |
190°C/2.16kg |
ISO 1133 |
1.7~2.5 |
g/10min |
Tensile strength at yield |
|
ISO 527-2 |
24 |
MPa |
Elongation at break |
|
ISO 527-2 |
>600 |
% |
Injection Grade
Item |
Test Condition |
Test Method |
Value |
Unit |
MFR |
190°C/2.16kg |
ASTM D-1238 |
20 |
g/10min |
Density |
--- |
ASTM D-792 |
0.954 |
g/cm3 |
Tensile strength at yiled |
--- |
ASTM D-638 |
28 |
MPa |
Elongation at break |
--- |
ASTM D-638 |
250 |
% |
Impact tensile strength |
--- |
ASTM D-1822 |
42 |
kJ/m2 |
ESCR |
|
ASTM D-1693 |
3 |
--- |
VACIT |
--- |
ASTM D-1525 |
127 |
°C |